Shopping Cart
There are no more items in your cart
Door Replacement Shutter Tumbo (cut to length you will ask us)
Vertical motion sieve with great durability.
For verticals that are in a roll.
If the shaft does not match yours, you can remove the cloth and apply it to your shaft very easily !!
The price concerns sq.m.
The roll has a length of 2400 mm, while we will cut it to the height you choose.
For verticals that are in a roll.
If the shaft does not match yours, you can remove the cloth and apply it to your shaft very easily !!
The price concerns sq.m.
The roll has a length of 2400 mm, while we will cut it to the height you choose.
Product customization
Don't forget to save your customization to be able to add to cartΔώστε τις ακριβείς διαστάσεις
Η διαστάσεις που μας αναγράφεται είναι με δική σας ευθηνή …… παρακαλώ δώστε μεγάλη σημασία στην μέτρηση σας .
Instructions for changing the cloth in a wheat roll:
The driver's screws, which are "hidden" inside the driver, are unscrewed. They are usually cross screws.
Taking out the screws, we slowly pull the driver left and right. Then we solve the 4 screws that hold the box of the wheat roll, we lower it down and we take it out on a table.
Carefully, pull the lid from the side that shows a rotating arrow, there is the spring of the wheat roll, holding firmly loosen slowly so that the spring unfolds.
Very carefully again. as soon as the spring unwinds we pull it out of the shaft. We completely pull out the old cloth and leave the shaft bare so that the new wheat can be worn.
We unroll the new cloth after we have cut it with a saw to the measures of the old axis.
Once we unroll it completely, we remove the film sticker that exists on the new axis, which we then throw away.
Glue the cloth with the double-sided tape to the old axis of the sieve, and slowly wrap the cloth.
The driver's screws, which are "hidden" inside the driver, are unscrewed. They are usually cross screws.
Taking out the screws, we slowly pull the driver left and right. Then we solve the 4 screws that hold the box of the wheat roll, we lower it down and we take it out on a table.
Carefully, pull the lid from the side that shows a rotating arrow, there is the spring of the wheat roll, holding firmly loosen slowly so that the spring unfolds.
Very carefully again. as soon as the spring unwinds we pull it out of the shaft. We completely pull out the old cloth and leave the shaft bare so that the new wheat can be worn.
We unroll the new cloth after we have cut it with a saw to the measures of the old axis.
Once we unroll it completely, we remove the film sticker that exists on the new axis, which we then throw away.
Glue the cloth with the double-sided tape to the old axis of the sieve, and slowly wrap the cloth.
396-006
New
No reviews
Customers who bought this product also bought:
Viewed products
11 other products in the same category:
Tap to zoom
