Window lift and swivel housing

Necessary for the correct installation on the roof of the proportional window seal which is delivered and included in the price of the window.

One way of opening is rotated centrally axis.The frame is rotated up to 180 degrees for comfortable cleaning the outside of window. Changing position in the opening selector (preselect) window opens up, giving ample space, ventilation and views to outside.The frame stays in whatever position leave from 0-35 degrees. The frame is made of wood Abies alba impregnated in vacuo and painted with two coats of clear acrylic lacquer. Externally the seals are made of aluminum-coated polyester film with special UV resistance and in all weather conditions.

The automatic V40P ventilation port built into the top of the panel allows ventilation of the attic, even when the window is fully closed.

Equipped with energy glazing U3 (Ug = 1.1 W / m2K), double glazing (4H-16-4T) with toughened external glass (Toughened glass) for increased antihailing protection for life.

The innovative topSafe system (three-point safety system) offers maximum security breach when the window is closed.It is placed on roofs with a slope of 15 ° to 55 °

Characteristics

A new generation of windows with lifting and rotating mechanism with two separate modes of the window opening, either upwardly or rotation. The separate opening operation offers stability within and increases safety. The opening function upwards allows the opening leaf standing in any position from 0-35 ° allowing easy approach to the edge of the open window, thus increasing the useful space and offering unlimited views to the outside. The operation of the rotation allows the openable panel to be rotated through 180 °, thereby serving in the purification of the outer glass pane and the handling of external sun awning.

The innovative mechanism ensures easy handling and stability of the frame during operation and the two separate exposure modes. The choice of how the window opening is preselect the preset switch on the side of the window and is visible when the window is closed.

Convenient operation with the handle located at the bottom of the window. The window is equipped with type handle
Elegant and with two positions microapertured before closing.
Easy cleaning of outer pane and operation of outdoor awnings, with the closure of the opening leaf when it is rotated 180 °.
Energy glazing U3 (Ug = 1,1 W / m2K) as standard equipment.
Increased burst strength with topSafe system.
Large variety of accessories.
Placed on roofs with a slope of 15 ° to 55 ° and a special edition of 15 ° -85 °.

Frequent questions

On my roof the clear opening between the vertical (or scissors or fee) is 60 cm. I could put a greater width window p.ch.78 cm or 94 cm;
Yes, you can place a larger width roof window. Should your craftsman can cut scissors to prevent and to connect with the neighboring of as in the pictures below. Then the installation is done properly.
In an integrated roof I place one or more roof windows?
Yes, you can put what your windows are necessary. The only difference to a roof under construction, is that it should be removed some tiles that will be left over.
I inclined roof of concrete, I place roof window?
a) If there is an opening in the roof can normally be positioned a window to match the dimensions of the opening.
b) If there is an opening, you can cut the concrete, but always in consultation with the permission of the supervising engineer.
What is permissible inclination of the roof for mounting a roof window;
The slope on which to place a roof window is between 15th and 90th.
If the slope of my roof is less than 15, how do I put a roof window?
If the slope of your roof is less than the 15th FAKRO company has a special seal which gives the window a further slope 10c. The seal can ie. Be used on slopes from 10th to 75th.